: Click "Start" or "Next" in the loader, then immediately turn on the power to the receiver from the back switch.
: Plug the RS232 cable into your PC and the turned-off receiver.
: Open your loader tool (e.g., Erom Upgrade Tool) and select the correct COM Port for your PC.
: Once the loader says "Finished" or "Successful," restart the device. Alternative: USB Recovery (If Supported) For some firmware versions, you can recover via USB: Rename your firmware/dump file to GX_rom.bin or update.bin . Save it in a folder named files on a FAT32 USB drive. Insert the USB into the receiver while it is OFF.
: The progress bar will move twice (uploading and then burning to flash memory). Do not power off during this process.
: Software like the Erom Upgrade Tool or dedicated StarSat loaders. Recovery Steps (Using Loader)
Below is the standard procedure for using a recovery dump file: