N_031.mp4 Today

: Reconnect hoses and bleed the air from the hydraulic lines to ensure accurate readings. ⚠️ Critical Safety Checks

: Test that the system successfully disables crane functions during an overload condition. n_031.mp4

: Verify voltage at the sensor. Expected values are roughly 3.125V (0°) and 2.5V (45°) . 3. Pressure Transducer Maintenance : Reconnect hoses and bleed the air from

: Check the angle display at 20°, 45°, and 70°. The display must be within ±0.5 degrees of the inclinometer reading. n_031.mp4